Rabbit L5-2.5L (CBUA) (2008)
There are different ways of securing the impact bolster -1- in front of the clutch pedal -2-.
Securing with Two Bolts
-
Install the impact bolster -1- and tighten the two bolts to the tightening specification.
Securing with One Bolt
-
Install the impact bolster -1- and tighten the bolt -2- to the tightening specification.
-
Install the trim cover on the driver side, as well as the covering under the trim cover.
Tightening Specifications
Clutch Pedal Mounting Bracket
Clutch Pedal Mounting Bracket - 0A4, 5 Speed M/T
Special tools, testers and auxiliary items required
^
Hose clamps up to 25 mm diameter. 3094
Removing
-
First check whether a coded radio is installed. In this case, find out anti-theft coding.
-
Disconnect battery ground (GND) strap with ignition switched off.
-
Remove entire air filter housing, if it is located in the vicinity of the battery.
-
Remove battery and battery carrier.