Rabbit L5-2.5L (CBUA) (2008)
1 - Emblem
^
Can be carefully pried off a plastic or leather shift knob
2 - Shift lever knob
^
With boot
^
The shift lever knob and boot cannot be separated from each other.
^
Always replace together
3 - Clamp
^
For securing the shift lever knob to the shift lever
^
Always renew
4 - Cover for center console
^
Combined in one piece with the upper center console section on some versions
5 - Noise insulation
^
Not equipped on all vehicles
^
Arrow on noise insulation points in direction of travel
^
Catches are arranged in varying intervals
^
Therefore, installation is only possible in one position
Shift Lever and Housing Assembly Overview, From 10.06
Shift Lever and Housing Assembly Overview, from 10.06 - 0A4, 5 Speed M/T
Note:
^
Lubricate mounting areas and slide surfaces with grease G 000 450 02.
^
Selector mechanism, disassembling and assembling.