Rabbit L5-2.5L (CBUA) (2008)
1 - Base plate
^
Bend open tabs to remove
^
Always renew
2 - Gasket
^
Always renew
3 - Selector lever
4 - Damping washer
^
Slide out of shift lever as far as stop -arrow-
5 - Retaining washer
^
Do not damage cables when removing
^
Always renew
6 - Selector cable
^
Pry off of selector bracket
^
Press onto selector bracket inside the shift mechanism
7 - Bushing
8 - Shift cable
^
Pry off of shift lever guide
^
Press onto shift lever guide inside the shift mechanism
9 - Damper
10 - Bearing shell
^
Is damaged during removal
^
Always renew
11 - Bushing
12 - Retaining washer
13 - Spring
14 - Bushing
15 - Shift lever guide
16 - M8 25 Nm hex head nut; M6 8 Nm hex head nut
^
Quantity: 4
17 - Gasket
^
Between shift housing and floor
^
Self-adhesive