Tiguan 4Motion (5N1) L4-2.0L Turbo (CCTA) (2009)
Cowl Moulding / Trim: Service and Repair
Plenum Chamber Cover
Plenum Chamber Cover
Removal
-
Remove wiper arms.
-
Pull off seal - 5 - on the entire length of plenum chamber cover - 1 and 2 -.
-
Remove the mounting clamps - 6 - from the plenum chamber cover.
-
Pull out plenum chamber covers - 1 and 2 - starting at center carefully upward from windshield binding profile - 3 -. Always begin with plenum
chamber cover lying on top.
Installation
CAUTION!
Do not use any tools when installing the plenum chamber into the binding profile.