Tiguan 4Motion (5N1) L4-2.0L Turbo (CCTA) (2009)
-
Spray the windshield binding profile - 3 - with a soup solution to make easier to install the plenum chamber covers - 1 and 2 -.
-
Place plenum chamber covers - 1 and 2 - onto binding profile - 3 - and clip it into binding profile starting from the center using light pressure.
Begin with plenum chamber cover lying on bottom.
-
Secure the plenum chamber cover with the securing clamps - 6 -.
-
Install seal - 5 - on to plenum chamber cover and windshield wipers.
‹› In new windshields, an insert is installed in the binding profile. This insert must be removed before installing the plenum chamber cover.
‹› Inspect the foam pieces - 4 - for damage; replace if necessary.