Touareg V8-4.2L (AXQ) (2006)
Headlamp Alignment Actuator: Description and Operation
Main Headlamps With Gas Discharge Lamps and Cornering Light, Through 11/06
Automatic Headlamp Range Control Adjusting Motor
Automatic Headlamp Range Control Adjusting Motor
Left Headlamp Beam Adjustment Motor V48 and Right Headlamp Beam Adjustment Motor V49 is located inside the headlamp and cannot be
disassembled.
Headlamp must be replaced if damaged.
Checking headlamp range control adjusting motor
Left Headlamp Beam Adjustment Motor V48 and Right Headlamp Beam Adjustment Motor V49 can be checked via output Diagnostic Test Mode
(DTM) of Headlamp Range/Cornering Lamp Control Module J745.
Dynamic Cornering Lamp Adjusting Motor
Dynamic Cornering Lamp Adjusting Motor
Left Dynamic Cornering Light Motor V318 and Right Dynamic Cornering Light Motor V319 is located inside the headlamp and cannot be
disassembled.
Headlamp must be replaced if damaged.
Checking dynamic cornering lamp adjusting motor
Left Dynamic Cornering Light Motor V318 and Right Dynamic Cornering Light Motor V319 can be checked via output Diagnostic Test Mode (DTM)
of Headlamp Range/Cornering Lamp Control Module J745.
Headlamp Reflector Adjustment Solenoid
Headlamp Reflector Adjustment Solenoid
HID lamps only generate low beams in standard "Xenon" headlamps. "Bi-Xenon" allows "one" HID lamp to generate low beams and high beams. For
this purpose, an electromechanical adjuster (Left Headlamp Reflector Adjustment Solenoid N395 and Right Headlamp Reflector Adjustment Solenoid
N396 ) opens the dimmed region of low beam headlamp when high beam function is operated and a high beam light emission results.
Removing and installing Headlamp Reflector Adjustment Solenoid
Left Headlamp Reflector Adjustment Solenoid N395 and Right Headlamp Reflector Adjustment Solenoid N396 are located inside the headlamp and
cannot be replaced or adjusted separately.
Headlamp must be replaced if damaged.
Checking Headlamp Reflector Adjustment Solenoid
Left Headlamp Reflector Adjustment Solenoid N395 and Right Headlamp Reflector Adjustment Solenoid N395 can be checked via output Diagnostic
Test Mode (DTM) of Vehicle Electrical System Control Module J519.