volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Console Lamp Switch > < Removal and Replacement|Page 12033
Page 2
background image

-

Release locking mechanism - arrows - at bridge of right Steering Wheel Tiptronic Switch E389.

-

Carefully set aside bridge with right Tiptronic switch.

-

Release locking mechanism - arrows - at bridge of left Steering Wheel Tiptronic Switch E389 and remove the complete Steering Wheel Tiptronic
Switch E389.

-

Carefully remove Airbag Spiral Spring/Return Spring With Slip Ring F138 and Steering Angle Sensor G85 from steering column switch.

NOTE:  Airbag Spiral Spring/Return Spring With Slip Ring F138 and Steering Angle Sensor G85 must not be twisted out of center position
during removal.

-

To remove "windshield wiper switch", remove bolts - 2 -.

-

Remove "windshield wiper switch".

-

To remove "turn signal switch", remove bolts -1 -.

-

Remove "turn signal switch".

-

Remove Steering Column Electronic Systems Control Module J527 from "turn signal switch".

Assembly:

Assemble in reverse order of disassembly, observing the following:

NOTE:

-

If Steering Column Electronic Systems Control Module J527 is replaced, it must be coded.

-

Make sure wires are routed correctly at steering column switch.

Console Lamp Switch > < Removal and Replacement|Page 12033