Touareg 2 V6-3.6L (BHK) (2008)
‹› To remove the retaining plate the bolts - 1 - are not loosened or removed, they are used for guiding the retaining plate.
‹› Mark the connections for each motor to prevent confusing them.
-
Disconnect connectors.
-
Pull retaining plate and control motors out downwards.
-
If the Defroster Door Motor (V107) must be replaced, then remove the screws - 4 - (quantity: 3) from the left motor, identified by - A - in the
illustration.
-
If the Front Air Distribution Motor (V145) must be replaced, then remove the screws - 4 - (quantity: 3) from the right motor, identified by - B - in
the illustration.
Installing
Installation is carried out in the reverse order, when doing this note the following:
-
When installing, make sure control motor drivers - A - are pushed into retainers - B -.
-
Initiate the basic setting function with the Vehicle Diagnosis, Testing And Information System (VAS 5051B).
Footwell and Temperature Regulator Door, Manual A/C System
Door Motors
Footwell and Temperature Regulator Door, Manual A/C System
Removing