volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

With One Piece Intake Manifold|Page 1201 > < With One Piece Intake Manifold|Page 1199
Page 2
background image

9

6 Nm

10

Spring-type clip

‹› Check for secure seat.

11

Connecting hose

12

Vacuum line bracket

13

To throttle valve control module (J338)

14

To compressor for air suspension

‹› Separating connection, refer to --> [ Connecting Line to Air Suspension Compressor, Disconnecting ].

‹› Depending on optional equipment, connection may be sealed with a  blanking plug.

15

Heat shield

‹› For upper part of air filter housing.

16

6 Nm

Connecting Line to Air Suspension Compressor, Disconnecting

Disconnect the connecting line at the upper air filter housing -  arrow - as follows:

-

Carefully pry off the green circlip - 1 - using a  screwdriver. Then press the clamping ring - 2 - in direction  of - arrow -.

-

Pull only the slackened line - B - from the connection -  A - at the air filter.

With One Piece Intake Manifold|Page 1201 > < With One Piece Intake Manifold|Page 1199