Assembly overview - bulkhead
- Make
- Volkswagen
- Model
- Up!
- Section
- Body front › Bulkhead › Assembly overview - bulkhead
BodyAssembly overview - bulkhead
| Assembly overview - bulkhead |
Note| The bulkhead -1- is bolted and also bonded in place with butyl adhesive sealant -4-. |
| 1 - | Bulkhead |
| q | Removing: |
| – | After removing bolts -3-, cut through adhesive bead -4- using workshop equipment. |
| 2 - | Bolt |
| q | Qty. 6. |
| q | Specified torque: 25 Nm |
| 3 - | Body flange |
| 4 - | Butyl adhesive sealant |
| q | If necessary, mix based on D 450 273 A2. |
Parts & tools for this job For Volkswagen Up!
- TOOLTrim removal tool kitSearch: trim removal tool kit
- PARTTouch-up paintSearch: Volkswagen touch up paint
- PARTPanel clip assortmentSearch: Volkswagen panel clips assortment
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.