Up!
Assembly overview - rear window |
1 - | Rear window |
q | Removing and installing → Chapter |
q | Gap width -c- between side panel and window must be uniform on left and right. |
q | Gap width -d- between rear bumper cover and window must be uniform. |
2 - | PUR adhesive sealant |
q | Cross section of bead: -width b- = 7 mm, -height a- = 10 mm (including precoating, residual material on window glass and window flange). |
q | Minimum curing period → Chapter. |
3 - | Body flange |
4 - | Spacer |
5 - | Connection for rear window heating |
6 - | Side panel |