ABS

Make

Volkswagen

Model

Up!

Section

ABS, ADR, TCS, EDL, ESP › Fitting location overview › ABS

Running gearABS

ABS

1 -	ABS control unit -J104-

q	Location: on hydraulic unit, on left in engine compartment, under battery tray.

q	Do not separate connector before successfully completing self-diagnosis. Switch ignition off before separating connector.

q	Removing and installing → Chapter.

2 -	ABS hydraulic unit -N55-

The hydraulic unit consists of the components:

q	ABS return flow pump -V39-

q	Valve block (contains inlet and outlet valves).

q	ABS return flow pump -V39- and valve block should not be separated from each other

q	Removing and installing → Chapter.

3 -	Traction control system warning lamp -K86-

q	Location: in dash panel insert.

4 -	ABS warning lamp -K47-

q	Location: in dash panel insert.

5 -	Brake system warning lamp -K118-

q	Location: in dash panel insert.

6 -	Parking brake warning lamp -K139-

q	Location: in dash panel insert.

7 -	Diagnostic connection

q	Location: Driver footwell cover.

8 -	Brake light switch -F-

q	Including brake pedal switch -F47-.

q	Removing and installing → Chapter.

9 -	Front right/left speed sensor -G45-/-G47-

q	Removing and installing → Chapter.

10 -	Rear right/left speed sensor -G44-/-G46-

q	Removing and installing (drum brakes) → Chapter

11 -	Wheel hub with wheel bearing

q	ABS sensor ring is installed in wheel bearing.

12 -	Wheel hub with wheel bearing

q	ABS sensor ring is installed in wheel bearing.

01 Steering & suspension