volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Removing and installing heater and air conditioning unit > < Removing and installing evaporator

Up!

Removing and installing evaporator temperature sensor
Removing and installing evaporator temperature sensor
Removing
–  Remove control and display unit → Chapter.
–  Remove dash panel end trim on driver side → General body repairs, interior; Rep. gr.68.
   
–  Disconnect connector from control and display unit and unhook line from evaporator temperature sensor -G308-.
–  Turn evaporator temperature sensor -G308--1- 90° in -direction of arrow- and remove it.
Installing
–  Install evaporator temperature sensor -G308- in reverse order of removal.
  N87-10897

Removing and installing heater and air conditioning unit > < Removing and installing evaporator