Removing and installing front treble loudspeakers

Make

Volkswagen

Model

Up!

Section

Infotainment › Sound system › Removing and installing front treble loudspeakers

Vehicle electricsRemoving and installing front treble loudspeakers

Removing and installing front treble loudspeakers   Note Removal and installation is performed in the same manner on the left and right sides. Removing Before beginning dismantling work, perform the following steps: –  Switch off ignition and all electrical consumers, and remove ignition key. In order to replace a loudspeaker, the A-pillar trim must first be removed → Trims/insulation; Rep. gr.70

–  Detach connector -1- from treble loudspeaker -2-. Installing   Note The treble loudspeaker and the A-pillar trim are installed as a unit and therefore can only be renewed together. Note trim colour number when ordering spare part. Installation is carried out in the reverse sequence of removal.

03 General