volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Steering column switch module (SCSM) > < Removing and installing number plate light

Up!

Removing and installing bulb for number plate light
Removing and installing bulb for number plate light
Removing:
–  Switch off ignition and all electrical loads, and pull out ignition key.
–  Remove number plate light -X- → Chapter.
   
–  Pull glass base bulb -2- in -direction of arrow- out of bulb holder -1- in a straight line.
Bulb for number plate light -X-: glass base bulb 12V, 5W.
Installing:
Installation is carried out in reverse order of removal.
–  Check functioning of number plate light.
  N94-12634

Steering column switch module (SCSM) > < Removing and installing number plate light