volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Removing and installing steering column switch module (SCSM) > < Removing and installing bulb for number plate light
Steering column switch module (SCSM)
Steering column switch module (SCSM)
General description:
The following equipment-specific components are integrated into the steering column switch:
t  Turn signal switch -E2-
t  Windscreen washer pump switch (automatic wash/wipe and headlight washer system) -E44-
t  Headlight dipper and flasher switch -E4-
t  Parking light switch -E19-
t  Intermittent wiper switch -E22-
t  Rear window wiper switch -E34-
t  Intermittent wiper regulator -E38-
t  CCS switch -E45-
t  Cruise control system (CCS) SET button -E227-
  Note
The entire steering column combination switch is to be renewed → Chapter if one of the above components is defective.
The airbag coil connector and return spring with slip ring -F138- are attached to the steering column switch and are to be replaced separately → General body repairs, interior; Rep. gr.69.
Fault detection and fault display:
The following components feature self-diagnosis capability:
t  Turn signal switch -E2-
t  Windscreen washer pump switch (automatic wash/wipe and headlight washer system) -E44-
t  CCS switch -E45-
t  Intermittent wiper switch -E22-
t  Steering angle sender -G85-
For fault finding, use vehicle diagnosis, testing and information system -VAS 5051A- in „Guided fault finding“ mode.
→ Chapter „Removing and installing steering column switch module (SCSM)“
   

Removing and installing steering column switch module (SCSM) > < Removing and installing bulb for number plate light