Vanagon F4-1915cc 1.9L (Water Cooled) (1983)
CRANKSHAFT END PLAY, CHECKING
-
check crankshaft end play (main bearing 1 without shoulder)
^
new: 0.07-0.13 mm (0.003-0.005 in.)
^
wear limit: 0.15 mm (0.006 in.)
-
if out of adjustment, adjust
CRANKSHAFT END PLAY, ADJUSTING
Shim arrangement
Note
Shims C are available in different thicknesses. Thickness is etched on each shim.
A = Thrust washer
^
tab (arrow) points toward crankshaft bearing B = 81.0 mm (3.2 in.) dia shim C = 75.0 mm (3.0 in.) dia shims D = 94.0 mm (3.7 in.) shim E =
Oil seal
^
pry out with screwdriver F = O-ring
^
always replace
Parts required
Description
Part no.
Quantity
Thrust washer
025 105 283
1
81.0 mm (3.2 in.) dia shim
025 105 281
1
75.0 mm (3.0 in.) dia shims
021 105 281
2
(0.30 mm thickness) 021 105 283 (0.32 mm thickness) 021 105 285 (0.34 mm thickness) 021 105 287 (0.36 mm
thickness) 021 105 289 (0.38 mm thickness) 021 105 291 (0.24 mm thickness)
94.0 mm (3.7 in.) dia shim
025 105 635
1
Oil seal
029 105 245 B
1
O-ring
021 105 279
1
CAUTION
Always install number of shims shown to obtain correct crankshaft end play.