volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

All Technical Service Bulletins for Constant Velocity Joint: > < Axle Shaft Nut and Spacer Sleeve - Changed
Page 1
background image

Constant Velocity Joint: Customer Interest
CV Joint - Knocking Noise From Rear

GROUP

42

NUMBER

87-01 August 5, 1987

MODEL(S):

Vanagon, all m..y.
SUBJECT:

Knocking noise from rear -

CV joint

A noisy CV joint could be caused by hardened and dried lubricant.

^

Disassemble and inspect all joints, repack serviceable joints using new high temperature grease Part Number G 000 603.

^

Replace worn CV joints using Kit Number 251 598 101. This joint has a larger diameter ball bearing (from 19.05 mm to 20.0 mm) for longer
wear. Pack the replacement joint using the new high temperature grease supplied with the kit.

Production Change:
C.V. joints with increased bearing diameter installed as of Dec. 1984,
VIN:

25 FH 055 865

New high temperature grease in use as of Oct. 1986, VIN: 25 HH 037 577

All Technical Service Bulletins for Constant Velocity Joint: > < Axle Shaft Nut and Spacer Sleeve - Changed