Vanagon F4-1915cc 1.9L (Water Cooled) (1983)
Fig. 2 Wheel Bearing, Adjusting
-
tighten nut firmly to seat bearing, at same time turn wheel so bearing does not jam
-
back off nut
When bearing clearance is correctly adjusted when thrust washer can be moved slightly with screwdriver (arrow) and finger pressure. Do not pry
or twist screwdriver
Fig 3. Peening Nut, Locking
-
peen nut
-
install grease cap
-
peen nut on shoulder (arrow)
-
do not reuse peened nut, always replace