Vanagon F4-1915cc 1.9L (Water Cooled) (1983)
Shift Rail: Service and Repair
List of Modifications:
Shift Forks/Rails
-
1st/2nd and 3rd/4th gear shift forks/rails are riveted and welded to maintain proper alignment to each other
Synchronizers
-
1st/2nd and 3rd/4th gear synchronizers have been changed to prevent jumping out of gear
-
Changes cannot be detected visually
Reverse Shift Fork/Rail
-
Mating surfaces of fork/rail have splines to properly align to each other
-
Reverse shift rail is lengthened and has two bearing shells which ride in 3rd bearing, which is housed in boss provided in gear carrier cover