240 L4-2.3L SOHC VIN 88 B230F (1986)
CO-content = 0.4-0.8 %.
Adjusting CO
CO should only be adjusted after all possible faults have been checked/rectified.
-
Turn off engine.
-
Drill two 2 mm (0.08 in.) holes in plug.
-
Withdraw plug with circlip pliers.
-
Start engine.
-
Adjust CO content.
Counterclockwise reduces CO
Clockwise increases CO
Adjustment range = 15 turns.
-
Seal CO adjustment screw
Always use a new plug.
-
Push plug into position.