240 L4-2.3L SOHC VIN 88 B230F (1986)
Idle Speed: Adjustments
Check/Adjust Idle Speed
-
Warm-up engine
-
Run engine at 1500 rpm.
NOTE: Warm-up engine until radiator thermostat opens and then for a further 10 minutes.
-
Ground blue-white wire to close idle air control valve.
NOTE: Switch off AC as applicable.
-
Check idle speed.
-
Adjust engine speed with idle adjustment screw to 700 rpm.
-
Disconnect ground from test point.
Engine speed should increase to 750±20 rpm
If values are incorrect: check/adjust throttle controls.