240 L4-2.3L SOHC VIN 88 B230F (1986)
Control Arm Bushing: Customer Interest
Steering Wheel - Vibration
Subject:
Product
STEERING
CARS
WHEEL VIBRATION Group 77
Date:
No.
FEBRUARY 1986 102
THIS BULLETIN APPLIES TO THE U.S. AND CANADA
If ordinary wheel balancing procedures prove unsuccessful in eliminating steering wheel vibration, a harder control arm rear bushing may be installed.
REQUIRED PART:
Description Part No. Quantity bushing 1359812-2 X
When installed on the left control arm only, this hard bushing can reduce sensitivity to wheel vibration at
approximately 68 MPH (110 km/h)*.
Only if steering wheel vibration is still noticeable, the hard bushing may be installed on the right side; however,
more sensitivity to vibration may occur at speeds above 80 MPH (130 km/h)*.
*
Posted speed limits should, of course, always be observed!