240 L4-2127cc 2.1L SOHC B21F (1982)
Backup Lamp Switch: Service and Repair
Installation
1. Install back-up light switch. (as applicable). Use wrench 22 mm (7/8 in) to replace back-up light switch.
2. Re-clamp wire to gearshift carrier rod. Place harness on steel wire as shown. Install cross member bolts. Lower vehicle.
3. Inside vehicle:
-
Pull wiring harness.
-
Attach connector for back-up light.
4. Check operation.
5. Install left side panel center console.
6. Install gearshift lever cover.
