240 L4-2127cc 2.1L SOHC B21A (Can) (1984)
Thermostat: Testing and Inspection
THERMOSTAT TESTING:
-
Thermostat can be tested, if required, in hot water. After reaching opening temperature (see below) it should not take longer than 2 minutes for
thermostat to open fully.
-
Three types of thermostat are in use:
Marking 82:
Starts to open at .......................................................................................................................................................................... 81-83°C (176-181°F)
Fully open at .............................................................................................................................................................................. 90-94°C (194-201°F)
Marking 87:
Starts to open at .......................................................................................................................................................................... 86-88°C (187-190°F)
Fully open at ........................................................................................................................................................................................... 97°C (207°F)
Marking 92:
Starts to open at .......................................................................................................................................................................... 91-93°C (196-197°F)
Fully open at ......................................................................................................................................................................................... 102°C (216°F)