240 L4-2127cc 2.1L SOHC B21A (Can) (1984)
Coolant Pump: Service and Repair
Installation
Water Pump Installation
Adjusting Water Pump Position
Water Pump Return Pipe Installation
Install Water Pump:
1. Install a new gasket between pump and cylinder block.
2. Install a new O-ring on water pump.
3. Secure pump with two nuts.
-
Make sure that O-ring is in position and that it is not damaged.
-
Tighten the nuts so that pump does not slip, but can be moved upwards.
4. Tension the water pump against cylinder head.
-
Install washers and bolts.
-
Tighten nuts and bolts.
5. Install return pipe.
NOTE: On cars with Pulsair system the mounting bolt of the pipe must be replaced by a bolt of the new type.