240 L4-2127cc 2.1L SOHC B21A (Can) (1984)
Headlamp Wiper Motor: Service and Repair
E8
Headlamp Wiper Motor, Replacement
- Disconnect battery ground lead.
- Remove wiper arm. See: Headlamp Wiper Arm/Service and Repair
- 0pen connector. (Connectors for left and right-hand motors are both located at left wing.)
- Disconnect ground lead. (Both left and right-hand motors are grounded to left wing.)
- Undo nut holding motor to bracket.
- Slide off plastic tube.
- Remove motor.
- Reassemble in reverse order.
- Ensure that motor is parked before replacing wiper arm.