240 L4-2320cc 2.3L SOHC VIN 83 B230FD (1993)
Push bracket (A) into slot in heater and secure with clip (B).
Bend mounting bracket (C) back into position.
A9
Install new hose and refit support Install:
- new hose (A) between firewall connection branch and valve. Tighten clamps.
- support (B) between body and heater.
A10
Remove hose clamping tools
Remove:
clamping tools from heater hoses in engine compartment.
A11
Checking procedure
Check:
- coolant level and tighten expansion tank cap.
- operation of heater with engine running.
- inspect for leakage.
- top up coolant, if necessary.
A12
Reinstall components
Remove: