240 L4-2320cc 2.3L SOHC VIN 83 B230FD (1993)
Throttle Cable/Linkage: Adjustments
***UPDATED BY TSB 25202704, MAY 1991
Fig. 357 BASIC THROTTLE SETTING
NOTE: The basic throttle setting is necessary for the correct operation of the idle speed system and fuel injection control unit (ECU).
1.
Disconnect the throttle pulley link arm. Release the lock nut.
2.
Loosen the adjustment screw until the throttle is fully closed.
3.
Turn the adjustment screw clockwise until it just touches the link arm and then 1/4 turn more. Fig. 357. Tighten the locking nut.
NOTE: It may be necessary to loosen the throttle switch to center the valve, prior to adjusting it.
Fig. 358 CHECK TROTTLE SWITCH SETTING
4.
Check the throttle switch by opening the throttle valve slightly and listening for a "click". Fig. 358.
5.
Adjust the throttle switch by loosening the retaining screws (3 mm screw). Turn the switch slightly clockwise. Turn switch back again until "click"
is heard. Tighten the retaining screws. Recheck the setting.