240 L4-2320cc 2.3L SOHC VIN 83 B230FD (1993)
Press grease into connectors directly from tube.
Check that all spaces around connector terminals are filled.
Do not fill protective boots.
Reconnect connectors
Ensure that all seals are in proper position prior to reconnection.
Start engine and leave it running, one minute, then check on-board diagnostic system to ensure that no DTCs have been stored.
WARRANTY STATEMENT:
Claims may be submitted under the New Car Limited Warranty when a manufacturing defect is present using claim type: 01.
Oper. No.
Labor Description
Time Allowance
389003
Greasing of connectors
0.5 hr