240 L4-2320cc 2.3L SOHC VIN 83 B230FD (1993)
Assembly of Starter Motor
M19 Lubrication
Lubricate components according to instructions below. Use Bosch lubricant or bearing grease P/N 1 161 133-2 and engine oil.
1. Smear a thin layer of bearing grease on ends of shaft, shims and lock washer.
2. Oil bushing.
3. Apply plenty of grease to armature and groove for shift arm.
4. Apply a thin layer of bearing grease to armature shaft.
5. Oil bushings.
6. Apply a thin layer of bearing grease to shift arm track and solenoid core.
M20 Drive
Install drive, stop ring and lock washer on armature shaft. Slide stop ring over lock washer.
M21 Shift arm and armature