240 L6-2383cc 2.4L DSL SOHC D24 FI (1982)
The control valve sensor head is inserted in a cutout in the floor vent.
C1
Remove:
-
battery negative lead.
-
sound insulating and side panel on RH side.
-
defroster hose.
-
floor vent.
C2
Turn floor mat down. Put water tray underneath.
Note: For new version heater control valve and 1992 models onwards:
Install hose pliers on input and output hoses from heater matrix. Now undo hoses from heater matrix. Undo control wire from control valve.
Now go to step C10.
VERSION A
C3