740 L4-2.3L SOHC VIN 88 B230F (1985)
Clearance when checking:
Cold engine: 0.30-0.40 mm (0.012-0.016 in)
Hot engine: 0.35-0.45 mm (0.014-0.018 in)
Valve Adjustment Sequence
Check and note valve clearance of remaining cylinders:
-
Turn crankshaft 180 degrees clockwise and check cyl. 3
-
Turn crankshaft 180 degrees clockwise and check cyl. 4
-
Turn crankshaft 180 degrees clockwise and check cyl. 2
ADJUST VALVE CLEARANCE
Clearance when adjusting:
Cold engine: 0.35-0.40 mm (0.014-0.016 in)
Hot engine: 0.40-0.45 mm (0.016-0.018 in)
Turn camshaft to "clearance checking" position.
Remove adjustment washer:
-
Rotate the tappets so that the groove is completely to side.
-
Use press tool 5022 to depress tappets.
-
Use pliers 5026 to remove washer.
Washer (Shim) Selection Example