740 L4-2.3L SOHC VIN 88 B230F (1985)
Door Switch: Technical Service Bulletins
Door Switch - Revised
NUMBER
908
GROUP
36
MODEL
700-900
TITLE
DOOR SWITCH, MODIFICATION
700/900 -->1993
MARKET
US and Canada
DATE
November 1992
REFERENCE:
TP 31166/2 (ENGLISH); 11/88; LIGHTING, INSTRUMENT AND MISCELLANEOUS EQUIPMENT
Modification of door switch
A new-type door switch is now used in production and is also available as a replacement part. The new switch includes a drain hole in the rubber boot,
while the opening in the bottom of the switch unit is covered by tape. If used as a replacement part, the original type of switch should be modified as
described below, prior to installation.
Tape opening
Place a 19 x 19 mm (3/4 x 3/4") piece of transparent tape over the opening in the bottom of the switch unit (A).
Punch hole in rubber shield
Remove rubber boot from switch and punch 4 mm (5/32") hole close to bottom edge (B).
WARRANTY STATEMENT:
Claims may be submitted under the New Car Limited Warranty using chart