740 L4-2.3L SOHC VIN 88 B230F (1985)
Hall Effect Sensor: Technical Service Bulletins
Ignition - Replacement of Hall Switch
Subject:
Product
Ignition
CARS
Distributors
Replacement of
Group
HALL Switch 34
Date:
No.
May, 1985
5
THIS BULLETIN IS APPLICABLE TO THE U.S. AND CANADIAN MARKETS
If a defect is found in the HALL switch, the following repair guidelines must be observed.
1.
INTERMEDIATE SHAFT DRIVEN DISTRIBUTORS
Within the first year of warranty, the complete distributor must be replaced.
After the first warranty year, the HALL switch should be replaced separately. Refer to Service Manual, Ignition Systems, TP 30432/1 for
repair instructions, and Service Bulletin Group 34 No. 28 dated, April, 1985
2.
CAMSHAFT DRIVEN DISTRIBUTORS
The HALL switch cannot be replaced. The distributor should be replaced as a complete unit.