740 L4-2.3L SOHC VIN 88 B230F (1985)
740/760
From 1983 M/Y to 1990 M/Y, (744 Chassis No.-> 396999, 745 Chassis No.-> 242699, 764 Chassis No.-> 76899 and 765 Chassis No.->
31199) use Type A or B. (see part number)
NOTE:
If the car has a single-retractor belt, a dual-retractor seat belt system must be installed according to instructions found on page 338 of Service Manual TP
31127/1; Body, Interior, Climate.
From 1990 M/Y (744, Chassis No. 397000->, 745 Chassis No. 242700->, 764 Chassis No. 76900->, 765 Chassis No. 31200->) and up, use Type D.
780
From 1987 M/Y up to, and including, part of 1990 M/Y (780 Chassis No.-> 9964), use Type A.
From part of 1990 M/Y (780 Chassis No. 9965->) and up, use Type D.
900
From 1991 and up, use Type D.
850
From 1993 and up, use Type D
NOTE:
Cars with Chassis No. below 44448 where extender is needed, must have belt catches changed. Pivot type catch P/N 9136184-0 (driver side) and P/N
9136185-7 (passenger side) must always be used in combination with extender. New catches will be provided with extender if Chassis No. is below
44448.
Extender, Type A, can be used in conjunction with the seat belts.
Extender, Type B, can be used in conjunction with the seat belts.