740 L4-2.3L SOHC VIN 88 B230F (1985)
![background image](/volvo/740/l4-2.3l_sohc_vin_88_b230f/Page-1289011.png)
Install brush holder and brushes.
J27 Rear bushing cover
Position cover. Insert two rods and tighten.
J28 Axial clearance
Install shims and lock washer. Check axial clearance. Clearance = 0.1 - 0.3 mm (0.003 - 0.0118 in). Adjust using shims. Reinstall
bushing cap. Test starter motor before installing in vehicle.
J29 Starter motor terminals