740 L4-2.3L SOHC VIN 88 B230F (1985)
Attach Spring Compressor Tool 5407 and Compress Spring
^
Place compressor tools opposite each other and with three free spring coils between the tool jaws.
^
Compress each side alternately.
Remove Shock Absorber Nut
^
Use socket 5036 and holding tool 5037.
NOTE: For replacement of axial bearing only, remove washer, bearing, and axial bearing, then proceed to: Locate New Axial Ball Bearing in
Spring Plate section below.
^
Remove:
-
Washer.
-
Mount.
-
Axial bearing.
-
Shaped washer.
-
Spring seat.
-
Rubber spacer.
-
Bump stop.
-
Bellows.
-
Guide sleeve.
-
Spring.
NOTE: The spring seat and rubber spacer are one unit on 760 and 780 models 1988 and on.