740 L4-2.3L SOHC VIN 88 B230F (1985)
Windshield Washer Motor: Service and Repair
Front Washer Motor
H1
Windshield Washer Motor, Replacement
- Unplug connector.
- Lift out motor.
- Disconnect hose.
- Before replacing pump, try out motor with reversed 12V polarity to loosen any dirt blocking the pump.
- Reassemble in reverse order.
- Plug in connector and reinstall hose.
- Fit pump:
‹› Before fitting pump, immerse inlet pipe in plain or soapy water to avoid compressing rubber seal.
- Fill washer reservoir with fluid and check for leaks.
- Test pump