740 L4-2320cc 2.3L DOHC B234F (Can) (1992)
-
Calibrate seat.
-
Check function.
Drive Cable Right, Rear Seat-Cushion Motor, Change
Drive cable right, to rear seat-cushion motor, change
NOTE: When performing the following tasks, take care that the seat guide rails do not alter their position relative to one another, or it will not be
possible to replace the seat in the vehicle.
Preparations
-
Remove battery negative lead and note any radio code.
-
Remove seat from vehicle. See: Service and Repair/Remove Seat From Vehicle
-
Turn seat upside down on a clean sheet.
Removal of brackets
-
Remove brackets with three motors.
-
Slacken off the four screws.
Removal of right bracket
-
Remove seat right bracket which is fixed with six screws.
Removal
-
Remove screws to drive gear (4) parts.
-
Remove locking plate.
-
Remove drive cables from motor and drive gear.
Replace: