740 L4-2320cc 2.3L DOHC B234F (Can) (1992)
Wheel Speed Sensor: Service and Repair
Toothed Ring
FRONT SENSOR WHEEL, REPLACEMENT (SEPARATE HUB AND DISC)
Special tools: 951 2050, 9995082, 5225, 5294, 5340, 5350, 5351, 5408
AM1. Jack up and support rear of car. Remove wheel
Place support stands under jacking points.
Mark wheel position if locating stud is not fitted.
AM2. Remove brake caliper
Remove both mounting bolts and lift off caliper. Tie up caliper to prevent damage to hose.
AM3. Remove:
^
wheel locating stud
^
brake disc. Mark position of disc with respect to hub
^
dust cap. Loosen by tapping all around with sharp chisel
Note: Dust cap and nut must not be reused.
AM4. Remove hub nut
Use long bar and 36 mm socket.