740 L4-2320cc 2.3L DOHC B234F (Can) (1992)
See Camshafts/Tappets, Replacement See: Camshaft/Service and Repair
If tappets are in satisfactory condition:
Apply sealer at front and rear camshaft bearing caps
Use silicone sealer.
Apply bead of sealer to angle between cap and joint face.
Install new gaskets and replace valve cover
Position spark plug well gasket with arrow pointing to No.1 cylinder and marking facing upwards.
Shape outer gasket to fit camshaft bearing caps. Place gasket in position and replace valve cover.
NOTE: Remember to connect earth lead to distributor.
Install:
- ignition leads (in correct firing order)
- ignition lead cover plate
Check operation