volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

ABOUT US
Camshaft/Intermediate Shaft - Revised Seal|Page 1730 > < Camshaft/Intermediate Shaft - Revised Seal|Page 1728

740 L4-2320cc 2.3L DOHC B234F (Can) (1992)

Page 5
background image

Replace upper section of transmission mounting plate 
Adjust plate so that camshafts are centered in holes. Replace bolts between camshafts and under righthand idler.

Replace idlers 
Tighten to 25 Nm (18.5 ft.lb).

Install camshaft drive pulleys 
Use counterhold 5199.

Replace center bolts and tighten to 50 Nm (37 ft.lb.).

NOTE:  Camshafts must not be allowed to rotate when replacing the center bolts.

Camshaft/Intermediate Shaft - Revised Seal|Page 1730 > < Camshaft/Intermediate Shaft - Revised Seal|Page 1728