740 L4-2320cc 2.3L DOHC B234F (Can) (1992)
Connecting and mounting control module in cars without SRS (Airbag) and knee bolster
-
Connect control module and cable harness connectors.
-
Apply three sections of butyl tape to the control module.
-
Install control module to dashboard side section with butyl tape.
B8
Connecting and mounting control module in cars with SRS (Airbag) and knee bolster
-
Install control module on front of air hose under glove compartment with butyl tape and cable ties round duct and control module as illustrated.
-
Attach cable harness to existing cable harness at side of SRS (Airbag) module with 2 cable ties, one as near to the connector as possible to avoid
vibration on uneven road surfaces.
B9
Fastening cables in cars without SRS (Airbag) and knee bolster
-
Attach cable harness to existing cable harness module with 2 cable ties, one as near to the connector as possible to avoid vibration on uneven road
surfaces.
B10
Connection of cable to ground plate
-
Connect the black-white cable included in the new cable harness to the ground plate on the right side of the cowl.
The ground plate is located behind the fuel control module.