740 L4-2320cc 2.3L DOHC B234F (Can) (1992)
D9
Connecting and mounting control module In cars with SRS (Airbag) and knee bolster
-
Install control module on front of air hose under glove compartment with butyl tape and cable ties round duct and control module as illustrated.
-
Attach cable harness to existing cable harness at side of SRS (Airbag) module with 2 cable ties, one as near to the connector as possible to avoid
vibration on uneven road surfaces.
D10
Fastening cables in cars without SRS (Airbag) and knee bolster
-
Attach cable harness and the relay in the foam rubber covered hose which passes over the glove compartment to the side defroster with 2 cable ties,
one as close to the connector as possible to prevent vibration caused by uneven road surfaces.
D11
Connection to ground plate
-
Connect the black-white cable included in the cable harness to the ground plate on the right side of the cowl.
The ground plate is located behind the fuel control module.