740 L4-2320cc 2.3L DOHC B234F (Can) (1992)
/Page-163002.png)
Turn engine until camshaft/crankshaft markings coincide
Turn engine to TDC in No. 1 cylinder.
Check that markings on camshaft pulleys coincide with those on transmission mounting plate.
Check that marking on belt guide plate on crankshaft is opposite TDC marking on cylinder block.
...............................................................................................................................................................................................................................................
Removal Of Timing Belt
Remove timing belt
Slacken tensioner locknut.
Compress tensioner spring.
Tighten tensioner locknut.
Remove belt.
CAUTION: Crankshaft and camshafts must not be rotated while timing belt is slack or has been removed.