740 L4-2320cc 2.3L DOHC B234F (Can) (1992)
-
Install new solenoid and press home retaining clip.
-
Move gear selector lever to position P and install shift lock solenoid in lower mounting.
-
Press solenoid backwards until it snaps into upper mounting.
-
Reinstall housing and reconnect connector(s).
-
Reconnect reaction arm and control rod (washer and clip).
-
Reconnect connector on cars with AW 70/71
-
Check that selector lever clearance between positions D and N is the same as between 2 and 1 (applies to 740, 940, 940SE).
-
On 960, clearance between D and N should be the same as between 3 and L.
-
If required, adjust.
-
With ignition on, check that gear selector lever cannot be moved from P position. Operate brake pedal and check that lever can be moved to select