760 L4-2320cc 2.3L SOHC Turbo B23FT (1984)
Cabin Temperature Sensor / Switch: Service and Repair
NOTE: If an owner complains that the system occasionally goes from Air Conditioning to heat, the most common cause is the electrical connection from
Temperature Sensor Behind The Glove Box , Checking/Replacement
Removal:
1. Remove panel below glove box.
2. Remove glove box.
3. Remove sensor and tube
4. Use voltmeter/ammeter 951 0061. Check that current passes through sensor. If not, install a new one.
5. If replacement is necessary: disconnect tube and separate connector.