760 L4-2320cc 2.3L SOHC Turbo VIN 87 B230FT (1985)
![background image](/volvo/760/l4-2320cc_2.3l_sohc_turbo_vin_87_b230ft/Page-693002.png)
-
Adjust engine speed with idle adjustment screw to 700 rpm.
-
Disconnect ground from test point.
Engine speed should increase to 750±20 rpm
If values are incorrect: check/adjust Throttle Body and/or Throttle Cable/Linkage.
E12 Check/Adjust Ignition Setting
Idle speed fluctuations can affect ignition setting. Make sure that fluctuations are not greater than 25 rpm.
If greater, check air control valve hoses for blockages.
-
Check ignition timing with stroboscope.
Ignition setting should be 12° BTDC at idle.
-
Adjust setting by turning distributor body.
E13 Check CO
-
Disconnect Lambda sond
-
Check CO-content.
CO-content = 0.4-0.8 %.
E14 Adjusting CO
CO should only be adjusted after all possible faults have been checked/rectified.