760 L6-2383cc 2.4L DSL Turbo D24T (1983)
Detach mounting bracket at rear of transmission.
D24T MANUAL
Fit new mounting bracket P/N 1328519-2 to flywheel casing using original M 10 and M 12 bolts.
D24T AUTOMATIC
Remove oil cooler tube mounting bracket from flywheel casing and fit new mounting bracket P/N 1346771-7. (The new mounting bracket is designed to
support the exhaust pipe and oil cooler tubes).
D24T AUTOMATIC (early type)
Make an angle bracket as shown and attach it to mounting bracket on flywheel casing.
Place clamp onto oil cooler tubes and secure to angle bracket with a bolt.
